Experimental and numerical analysis of a helical coil solar cavity receiver: Thermal oil as the heat transfer fluid

The paper presents the novel design of double glazing helical coil solar cavity receiver for solar thermal applications. Performance model has been developed for the experimental setup based on energy balance equations. The results obtained were compared with horizontal tube receiver for the same experimental setup. The result shows that the 87.96% improvement in the convective heat transfer coefficient for the double glazing helical coil solar cavity receiver. Maximum conversion efficiency achieved is 21% more than that would be obtained for horizontal tube receiver. This paper also investigates how the quality of vacuum degraded with the temperature of the glass cover.     

Weather variability trends in Gangetic plains of Uttar Pradesh,India: influence on cropping systems and adaptation strategies

Environment, Development and Sustainability - Weather variability over the long run exhibits the trends of change in climate and forewarns for development and deployment of adaptation measures....     

Philosophy of sustainable development: understanding public health

Environment, Development and Sustainability - Health has been a focal point in sustainable development policies. Seventeen new goals of sustainable development contribute directly or indirectly to...     

Evaluation of an organic soil amendment generated from municipal solid waste seeded with activated sewage sludge

This study investigated the feasibility of using fresh activated sewage sludge as inoculum for the microbial valorization of segregated municipal solid waste and evaluated the quality of organic soil amendment generated. Organic fraction of municipal solid waste, which consisted of vegetative (vegetable, fruit and flower) wastes was seeded with activated sewage sludge and processed by rapid aerobic microbial treatment. Efficacy of microbial valorization process and quality of final product were assessed by physico-chemical analysis. Suitability of final product was assessed with regard to heavy metal content, pesticide residues, microbiological quality and phytotoxicity. Quality of the soil amendment generated was compared with the control product generated with a commercial microbial inoculum. Phytotoxicity experiments indicated the stimulatory effect of sewage sludge seeded soil amendment on plant growth but inhibition was observed in closed growth test due to the evolution of gaseous phytotoxic agents. The study suggests that segregated municipal solid waste can be effectively valorized with activated non-dewatered sewage sludge as inoculum and the quality of soil amendment generated was comparable to compost intended for unrestricted applications.     

Improving the dynamic response of frequency and power in a wind integrated power system by optimal design of compensated superconducting magnetic energy storage

The frequency deviation and power fluctuation need to be controlled in a wind-integrated power system (WIPS) for keeping the balance between system power generation and demand, which support the quality and stability of overall power system. The present paper addresses this problem while concerning the integration of intermittent wind power and load disturbance into the WIPS. With this intent, it proposes the compensated superconducting magnetic energy storage (CSMES) system with proportional integral derivative (PID) controller for improving the frequency and power deviation profile. A novel swarm intelligence-based artificial bee colony (ABC) algorithm is used for optimal design of PID-CSMES system. Robustness of the proposed ABC-based PID-CSMES control strategy is tested in WIPS under various disturbance patterns of load and wind power. To demonstrate the improved dynamic response, their simulation results are compared with particle swarm optimization-based PID-CSMES, PID with SMES, and only PID controller technique. The performance indices and transient response characteristics of frequency and power deviation are used to evaluate and compare the accuracy and efficiency of each controller. Stability of various system configurations is analyzed using eigenvalue location. Comparing the results of different controller in WIPS indicates a substantial improvement in the dynamic response of system frequency and power deviations by utilizing the proposed control strategy.     

Phosphorus-doped graphene supported palladium (Pd/PG) electrocatalyst for the hydrogen evolution reaction in PEM water electrolysis

PEM water electrolysis is one of the most efficient methods for the production of hydrogen because of produced high purity of the gases and environmentally friendly. In the present study, Phosphorus-doped Graphene (PG) was synthesized by thermal annealing of triphenylphosphine (TPP) and graphene oxide (GO). The PG supported palladium (Pd/PG) electrocatalysts were synthesized by chemical reduction method and used as the cathode for hydrogen evolution reaction (HER) electrode. Structural properties and electrochemical performances of the synthesized Pd/PG electrocatalyst were studied by FE-SEM, EDS, ICP, FT-IR, XRD, and Cyclic voltammetry (CV) methods, respectively. The membrane electrode assemblies (MEA’s) were fabricated using Pd/PG as cathode for HER electrode and RuO₂ as anode for OER electrode. Also, their electrochemical performances along with the corresponding hydrogen yields were evaluated in single cell PEM water electrolyzer at various experimental conditions such as different current densities from 0.1 to 2.0 A cm^?2 and temperatures (28–80°C). The synthesized Pd/PG electrocatalyst was observed a current density of 1 A cm^?2 with 1.95 V at 80°C. Further, long-term stability studies were carried out continuously up to 2000 h which showed a reasonable stability. Hence, the synthesized Pd/PG can be used as an alternative to Pt-based electrocatalysts for the HER in PEM water electrolysis.     

Assessment of biomass and lipid productivity and biodiesel quality of an indigenous microalga Chlorella sorokiniana MIC-G5

Generation of biodiesel from microalgae has been extensively investigated; however, its quality is often not suitable for use as fuel. Our investigation involved the evaluation of biodiesel quality using a native isolate Chlorella sorokiniana MIC-G5, as specified by American Society for Testing and Materials (ASTM), after transesterification of lipids with methanol, in the presence of sodium methoxide. Total quantity of lipids extracted from dry biomass, of approximately 410–450 mg g^?1 was characterized using FTIR and ¹H NMR. After transesterification, the total saturated and unsaturated fatty acid methyl esters (FAMEs) were 43% and 57%, respectively. The major FAMEs present in the biodiesel were methyl palmitate (C16:0), methyl oleate (C18:1), and methyl linoleate (C18:2), and the ¹H NMR spectra matched with criteria prescribed for high-quality biodiesel. The biodiesel exhibited a density of 0.873 g cm^–3, viscosity of 3.418 mm² s^?1, cetane number (CN) of 57.85, high heating value (HHV) of 40.25, iodine value of 71.823 g I₂ 100 g^?1, degree of unsaturation (DU) of 58%, and a cold filter plugging point (CFPP) of –5.22°C. Critical fuel parameters, including oxidation stability, CN, HHV, iodine value, flash point, cloud point, pour point, density, and viscosity were in accordance with the methyl ester composition and structural configuration. Hence, C. sorokiniana can be a promising feedstock for biodiesel generation.     

Incidence of keratinophilic fungi in waterlogged condition of paddy soil

Prevalence of keratinophilic fungi was observed in paddy field soil during different stages of cultivation viz., transplanting, tillering, milking and maturation. Out of total 76 soil samples, 65 soil samples were found to be positive for the keratinophilic fungi. Fourteen species belonging to a single genus Chrysosporium were isolated through out the cropping season. C. keratinophilum (17.1%) followed by C. tropicum (13.15%) were found to be the most dominating geophilic species. The highest percent distribution of keratinophilic fungi appeared during the milking stage (100%) of paddy cultivation, followed by the maturation stage (89.47%).     

Biomanagement of sago-sludge using an earthworm, Eudrilus eugeniae

Sago, the tapioca starch is manufactured by over 800 small-scale units located in the Salem district, Tamil Nadu, India. During the processing of sago it generates huge quantities of biodegradable solid waste, as crushed tubers. In present study an attempt was made to convert these biodegradable solid sago tubers into value added compost using an exotic earthworm, Eudrilus eugeniae. The experiments were carried out in a plastic tray at various concentrations of sago-sludge (50% 75% and 100%) for a period of 90 days. During the vermicomposting, data were collected on life form (cocoon, non clitellates, clitellates) of earthworm and it was found to be high in 50% followed by 75% and 100% concentrations. Chemical analysis of worked substrates showed a step wise increase of nitrogen and phosphorus. The fold increase of phosphorus and nitrogen were found to be high for sago-sludge undergoing vermicomposting than the control. During the composting period the organic carbon decreased from its initial value of 58, 76 and 107 mg/kg to 21, 24 and 65 mg/kg for 50, 70 and 100%, respectively The microbial analysis showed that after 75 days of composting, their population stabilized and further increase in composting period did not increase their population size. The results indicate that 50% and 75% concentration of sludge mixed with bedding material was ideal for the vermicomposting.